Emdom Vehicle Hydration Carrier
Approx. dimensions: 13" long x 7" wide x 3" deep
Approx. weight: 1lb. (Including MALICE clips)
*Custom-made available, please message us if necessary
*Pricing does not include shipping cost
*Receiver pays the shipping fee when the product arrived
Product Code: EU085A
Description
The Emdom Vehicle Hydration Carrier is a shorter and wider version of our H2O Hydration Carrier. It is designed to not cause the armor carrier it is mounted to be pushed up when seated in a vehicle. This shorter design also prevents interference with pouches mounted on the rear of a belt. The carrier will accommodate most standard or wide shaped reservoirs up to 70oz/2L (NOT included). The Vehicle Hydration carrier is mounted to the back of a MOLLE/PALS vest or armor carrier via the included set of MALICE clips. It can be utilized as a stand-alone pack by attaching our Emdom H2O Hydration Carrier Shoulder Strap System (sold separately). The Vehicle Hydration Carrier features a full length pocket for storage of long items such as antennae and tools. Longer items can be accessed from the upper most zippered opening and shorter items can be accessed from the lower zippered opening.
Mounting:
MOLLE/PALS compatible via three included long and short MALICE clips. Can be mounted to four or five columns of PALS webbing.Stand-alone:
At the very top and bottom corners on the rear of the carrier are Tri-glide and Looploc attachment points for our Emdom H2O Hydration Carrier Should Strap System (sold separately). These four attachment points can also be used to mount the Vehicle Hydration Carrier to our Emdom/MM Battle Suspenders (sold separately) via additional hardware (NOT included).Exterior front and sides:
Front features 6 rows x 5 columns of color/pattern matched PALS webbing. Each side features 4 rows x 2 columns of color/pattern matched PALS webbing. At the top is a 5.5” x 3” loop Velcro area integrated with the top two rows of PALS webbing. There are four 1” tab loops on the front for use as tie-downs or lash points. Integrated into the front of the carrier is a full length general purpose pocket with a zippered opening at the very top and another half way down. Zippered openings are covered, protecting them from damage and the elements.Exterior back and bottom:
Back features full MOLLE/PALS webbing grid for mounting to a compatible platform via included set of long and short MALICE clips. Drainage grommet at the very bottom of the pouch allows drainage of water, sand, and other unwanted debris.Main compartment opening:
Dual zippered opening is protected from damage and the elements by full length cover flap. Each zipper pull features two snaps which ensure a secure closure when snapped together. At the very top towards the back of the carrier is an elastic flap covered hydration tube port which will accommodate most mouth pieces and attachments.Main compartment interior:
The front portion features a 4.5” x 5” zippered mesh pocket for reservoir connectors, spare bite valves, cleaning tablets, etc. Behind the mesh pocket is a 4” x 4” loop Velcro panel for storing ID/IFF patches and markers. The back portion of the interior features a mesh reservoir pocket with an elastic rim. Towards the bottom is a 3” wide elastic compression strap. At the top is a paracord loop for hanging a reservoir.Reservoir compatibility:
The Vehicle Hydration Carrier is designed to accommodate a 70oz/2L reservoir (NOT included). However some 100oz/3L reservoirs can fit, albeit tightly.Color options:
Stocked in Black, Coyoteish, MultiCam, SDU Grey, Sewer Green. Available custom order colors: 3 Color Desert, Brown, Foliage Green, Khaki, Navy Blue, Olive Green, UCP, and Woodland. Please email us at gear@emdomusa.com for all custom color inquiries.FEATURES
- Approximate dimensions: 13” long x 7" wide x 3" deep
- Approximate weight: 1lb. (Including MALICE clips)
- MOLLE/PALS compatible.
- Three long and three short MALICE clips included.
- Can be mounted to four or five columns of PALS webbing.
- Rear of carrier features four attachment points for adding Emdom H2O Hydration Carrier Shoulder Strap System (sold separately) or mounting to Emdom/MM Battle suspenders (sold separately) via additional hardware (NOT included).
- Attach Emdom H2O Hydration Carrier Shoulder Strap System (sold separately) for stand-alone use.
- Shorter and wider than our Emdom H2O Hydration Carrier.
- Designed to accommodate a 70oz/2L reservoir (NOT included).
- External PALS webbing on front and sides.
- External 5.5” x 3” PALS integrated loop Velcro panel for medical, ID/IFF, or morale patches.
- All external zippered openings covered and protected from damage and the elements.
- Four 1” tab loops on front for tie-downs and/or lash points.
- Full length storage pocket with upper and lower zippered access.
- Elastic covered hydration tube port will accommodate most mouth pieces and attachments.
- Dual zippered main compartment opening.
- Each main compartment zipper pull features two snaps for secure closure.
- Internal 4.5” x 5” zippered mesh pocket for connecters, spare bite valves, cleaning tablets, etc.
- Internal 4” x 4” loop Velcro panel for storing ID/IFF patches and markers.
- Internal mesh reservoir pocket with elastic rim and 3” elastic compression strap keep reservoir in place and secure.
- Upper internal paracord loop for hanging reservoir.
- Drainage grommet for water, sand, etc.
- Murdock jacquard woven MultiCam webbing.
- Propel MultiCam Quiet loop Velcro.
- All applicable internal edges are finished with binding tape.
- Constructed from US Mil-Spec materials.
- Backed by Emdom USA lifetime warranty.
- Stocked in Black, Coyoteish, MultiCam, SDU Grey, and Sewer Green.
- Contact us at gear@emdomusa.com for available custom order colors: 3 Color Desert, Brown, Foliage Green, Khaki, Navy Blue, Olive Green, UCP, and Woodland.
- See Emdom USA manufacturer section at www.militarymorons.com for additional details and photos (Note MultiCam product pictured is older version).
Terms & Conditions of Warranty
- ONE YEAR WARRANTY SERVICE BOTH IN MATERIAL AND WORKMANSHIP.
- A FAILURE WHICH RESULTS FROM A PUNCTURE OR IMPROPER USE WILL NOT WARRANT FREE REPAIR OR REPLACEMENT.
- ALL THE MAIL EXPENSE WILL CHARGE THE CUSTOMER.
- EMDOM INTERNATIONAL INDUSTRIAL LIMITED WILL NOT BE RESPONSIBLE FOR ANY LOSS CAUSED BY THE DAMAGES OF OUR PRODUCTS EITHER DIRECTLY OR INDIRECTLY.
- ALL PRODUCTS OUTSIDE WARRANTY PERIOD WILL BE SERVICED AND CHARGED AT A REASONABLE RATE.
- EMDOM INDUSTRIAL LIMITED HAS THE RIGHT TO AMEND THE TERMS AND CONDITIONS OF THIS WARRANTY WITHOUT PRIOR NOTICE.